ketron peek 1000 data sheet

Welcome to our comprehensive data sheet on Ketron PEEK 1000, a high-performance material used in a wide range of industries. Whether you’re in the medical, pharmaceutical, or food processing sector, this material offers exceptional toughness and impact strength, making it ideal for demanding applications.

Ketron PEEK 1000 is approved for contact with food and can be sterilized using various methods. Its superior chemical and hydrolysis resistance, comparable to PPS, ensures reliability and durability even in challenging environments. With the ability to withstand high temperatures and exceptional wear-resistance, Ketron PEEK 1000 is a go-to choice for high-performance applications.

Our data sheet provides an in-depth look at the physical, mechanical, and electrical properties of Ketron PEEK 1000, allowing you to make informed decisions about its suitability for your specific requirements. Whether you need information on its density, melting temperature, or electrical conductivity, our data sheet has you covered.

Stay tuned as we dive deeper into the properties of Ketron PEEK 1000, starting with its physical properties, in the next section.

Physical Properties

The physical properties of Ketron PEEK 1000 are essential to understand its suitability for diverse applications. Here, we outline the key characteristics that make Ketron PEEK 1000 stand out:

  1. Density: Ketron PEEK 1000 has a density of 1.31 g/cm³ in grey/black color.
  2. Water Absorption: With a low water absorption rate of 0.1% after 24 hours and 0.5% at saturation, Ketron PEEK 1000 demonstrates excellent water resistance.
  3. Melting Temperature: The material boasts a high melting temperature of 340°C, allowing it to withstand demanding thermal conditions.
  4. Thermal Conductivity: Ketron PEEK 1000 has a thermal conductivity of 0.25 W/(K.m), ensuring efficient heat transfer.
  5. Linear Thermal Expansion: With a coefficient of linear thermal expansion of 50-10^-6 (°C)^-1, Ketron PEEK 1000 demonstrates dimensional stability across a range of temperatures.
  6. Temperature of Deflection under Load: Ketron PEEK 1000 maintains its structural integrity at high temperatures, with a temperature of deflection under load of 160°C.
  7. Maximum Service Temperature: The material can withstand a maximum service temperature of 310°C in air, making it suitable for applications requiring heat resistance.
  8. Flammability: Ketron PEEK 1000 exhibits good flammability properties, with a V-0 rating.

To help visualize the physical properties of Ketron PEEK 1000, refer to the table below:

Ketron PEEK 1000 Physical Properties

Property Value
Density (g/cm³) 1.31 (grey/black)
Water Absorption (%) 0.1% (after 24 hours), 0.5% (at saturation)
Melting Temperature (°C) 340
Thermal Conductivity (W/(K.m)) 0.25
Coefficient of Linear Thermal Expansion ((°C)^-1) 50-10^-6
Temperature of Deflection under Load (°C) 160
Maximum Service Temperature (°C) 310 (in air)
Flammability V-0 rating

Mechanical Properties

When it comes to mechanical properties, Ketron PEEK 1000 does not disappoint. It offers exceptional strength and durability, making it suitable for a wide range of applications. Let’s take a closer look at its key mechanical properties:

Hardness

Ketron PEEK 1000 has a Rockwell hardness of M100 and R126, indicating its excellent resistance to indentation and deformation. Additionally, it has a Shore D hardness of 85, indicating its high resistance to scratching and indentation.

Tensile Strength and Elongation

The material boasts an impressive ultimate tensile strength of 110 MPa, allowing it to withstand significant pulling forces without breaking. It also has an elongation at break of 40%, indicating its ability to stretch before reaching its breaking point.

Modulus of Elasticity

Ketron PEEK 1000 has a tensile modulus of 4.34 GPa, which reflects its high stiffness and resistance to deformation. The material also exhibits a flexural modulus of 4.14 GPa, indicating its ability to withstand bending forces without permanent deformation.

Flexural and Compressive Strength

The flexural yield strength of Ketron PEEK 1000 is 172 MPa, implying its ability to withstand significant bending forces without permanent deformation. Its compressive strength at 10% deformation is 138 MPa, indicating its ability to resist compressive forces.

Shear Strength, Friction, and Wear

Ketron PEEK 1000 exhibits good shear strength, with a value of 55.2 MPa. This property enables it to withstand forces acting parallel to its surface without shearing or slipping. Additionally, the material has a coefficient of friction of 0.4, indicating its ability to reduce sliding resistance. Its wear (K) factor is 755 x 10^-8 mm³/N-M, highlighting its resistance to wear and tear over time.

ketron peek 1000 material data sheet

Mechanical Property Value
Hardness (Rockwell) M100, R126
Hardness (Shore D) 85
Ultimate Tensile Strength 110 MPa
Elongation at Break 40%
Tensile Modulus 4.34 GPa
Flexural Modulus 4.14 GPa
Flexural Yield Strength 172 MPa
Compressive Strength (10% Deformation) 138 MPa
Shear Strength 55.2 MPa
Coefficient of Friction 0.4
Wear (K) Factor 755 x 10^-8 mm³/N-M

Electrical Properties

Ketron PEEK 1000 exhibits excellent electrical properties, making it a versatile material for various electrical applications. Here are the key electrical properties of Ketron PEEK 1000:

Surface Resistivity: >1013 ohm/sq

Volume Resistivity: >1014 ohm.cm

Relative Permittivity: 3.3 at 1 MHz

Dielectric Strength: 18.9 kV/mm

Dissipation Factor: 0.003 at 1 MHz

These electrical properties position Ketron PEEK 1000 as an optimal choice for applications that require reliable insulation and exceptional electrical performance.

ketron peek 1000 electrical properties

Electrical Properties of Ketron PEEK 1000

Property Value
Surface Resistivity >1013 ohm/sq
Volume Resistivity >1014 ohm.cm
Relative Permittivity 3.3 at 1 MHz
Dielectric Strength 18.9 kV/mm
Dissipation Factor 0.003 at 1 MHz

Availability

When it comes to finding the right Ketron PEEK 1000 for your project, we’ve got you covered. Our range of stock shapes ensures that you can find the perfect fit for your specific requirements. Take a look at the available options:

  • Round rods: Diameters ranging from 3 to 200 mm
  • Plates: Thicknesses from 5 to 100 mm
  • Tubes: Outer diameters of 50 to 200 mm

Rest assured that we can provide you with all the necessary test specifications upon request. Our goal is to supply you with the exact Ketron PEEK 1000 you need to achieve optimal results.

Stock Shapes Dimensions
Round Rods Diameters: 3 to 200 mm
Plates Thicknesses: 5 to 100 mm
Tubes Outer Diameters: 50 to 200 mm

ketron peek 1000 datasheet download

Compliance and Processing Properties

Ketron PEEK 1000 is a high-performance material that meets the strict requirements of FDA regulations, making it suitable for applications where contact with food is necessary. The material has excellent machinability, rated at 5 on a scale of 1-10, facilitating efficient processing and manufacturing.

Ketron PEEK 1000 is compatible with a wide range of substances, including alcohols, aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated solvents, ethers, ketones, weak acids, and weak alkalies. This broad chemical resistance allows for versatile usage across various industries.

However, it is important to note that Ketron PEEK 1000 has limited resistance to strong acids and sunlight. Extensive exposure to these elements may degrade the material’s performance or durability. As such, it is highly recommended that customers conduct thorough testing and assessment to ensure the suitability of Ketron PEEK 1000 for specific applications.

Chemical Resistance

Substance Rating
Alcohols Excellent
Aliphatic hydrocarbons Excellent
Aromatic hydrocarbons Excellent
Chlorinated solvents Excellent
Ethers Excellent
Ketones Excellent
Weak acids Excellent
Weak alkalies Excellent
Strong acids Limited
Sunlight Limited

Qualitative Processing Properties

Ketron PEEK 1000 is renowned for its exceptional processing properties, making it a preferred choice in various industries. Its versatility and ease of machining allow for precise fabrication and customization to meet specific application requirements. Furthermore, the material complies with FDA regulations, ensuring its suitability for applications that require contact with food.

One of the key advantages of Ketron PEEK 1000 is its robust resistance to chemicals, hydrolysis, and high temperatures. This makes it suitable for demanding environments where exposure to harsh substances or elevated temperatures is common. Whether it is corrosive chemicals, moisture, or extreme heat, Ketron PEEK 1000 exhibits remarkable durability and remains structurally intact.

In addition to its exceptional resistance, Ketron PEEK 1000 offers low wear and friction properties. This makes it highly desirable for applications where reduced friction and minimal wear are crucial, such as in sliding or rotating components. The material’s inherent ability to withstand friction and wear ensures prolonged longevity and efficient performance.

Ketron PEEK 1000 can be processed using conventional methods such as CNC machining and injection molding, making it compatible with existing manufacturing processes. Its machinability allows for precise shaping and intricate designs, ensuring high-quality end products. The material’s versatility in processing methods makes it accessible and adaptable for a wide range of industrial applications.

Conclusion

After considering the detailed specifications of Ketron PEEK 1000, it is clear that this high-performance material is a top choice for demanding applications in various industries. With its exceptional toughness, impact strength, and chemical resistance, Ketron PEEK 1000 is well-suited for use in medical, pharmaceutical, and food processing sectors.

The material has undergone rigorous testing and has proven to meet the highest standards, ensuring reliable and consistent performance. Its comprehensive data sheet and technical specifications provide all the necessary information for designers and engineers to make informed decisions.

When superior performance is required, Ketron PEEK 1000 does not disappoint. Its outstanding properties, including excellent toughness, impact strength, and chemical resistance, make it a reliable choice for applications that demand reliability and longevity. Trust in the specifications and capabilities of Ketron PEEK 1000 for your high-performance material needs.

FAQ

What industries can Ketron PEEK 1000 be used in?

Ketron PEEK 1000 is a high-performance material suitable for various industries, including medical, pharmaceutical, and food processing.

What are the physical properties of Ketron PEEK 1000?

Ketron PEEK 1000 has a density of 1.31 g/cm³ in grey/black color. It has a low water absorption rate of 0.1% after 24 hours and 0.5% at saturation. The material has a high melting temperature of 340°C and a thermal conductivity of 0.25 W/(K.m). Its coefficient of linear thermal expansion is 50-10^-6 (°C)^-1. Ketron PEEK 1000 has a temperature of deflection under load of 160°C and a maximum service temperature of 310°C in air. It also exhibits good flammability properties with a V-0 rating.

What are the mechanical properties of Ketron PEEK 1000?

Ketron PEEK 1000 has a Rockwell hardness of M100 and R126, and a Shore D hardness of 85. The ultimate tensile strength is 110 MPa with an elongation at break of 40%. The material has a tensile modulus of 4.34 GPa and a flexural modulus of 4.14 GPa. The flexural yield strength is 172 MPa, and the compressive strength is 138 MPa at 10% deformation. Ketron PEEK 1000 also exhibits good shear strength, with a value of 55.2 MPa. The coefficient of friction is 0.4, and the wear (K) factor is 755 x 10^-8 mm³/N-M.

What are the electrical properties of Ketron PEEK 1000?

Ketron PEEK 1000 has a surface resistivity of >10^13 ohm/sq and a volume resistivity of >10^14 ohm.cm. The material has a relative permittivity of 3.3 at 1 MHz and a dielectric strength of 18.9 kV/mm. The dissipation factor is 0.003 at 1 MHz.

What are the availability options for Ketron PEEK 1000?

Ketron PEEK 1000 is available in various stock shapes, including round rods with diameters ranging from 3 to 200 mm, plates with thicknesses from 5 to 100 mm, and tubes with outer diameters of 50 to 200 mm.

Is Ketron PEEK 1000 compliant with FDA regulations?

Yes, Ketron PEEK 1000 is compliant with FDA regulations and can be used in applications where contact with food is required.

What are the compliance and processing properties of Ketron PEEK 1000?

Ketron PEEK 1000 has good machinability with a rating of 5 on a scale of 1-10. The material is suitable for use in alcohols, aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated solvents, ethers, ketones, weak acids, and weak alkalies. However, it has limited service in strong acids and sunlight.

Is Ketron PEEK 1000 easy to process?

Yes, Ketron PEEK 1000 is known for its excellent processing properties. It can be easily machined and is FDA compliant. The material has good resistance to chemicals, hydrolysis, and high temperatures. It exhibits low wear and friction properties, making it suitable for various industrial applications. The material can be processed using conventional methods such as CNC machining and injection molding.

Leave a Comment

Your email address will not be published. Required fields are marked *